STANDARD SPECIFICATIONS

"Noisecuttrans" with the following specifications in standard type(F1, F3-F6 and G) is stocked.

  1. Fundamental wave frequency 50/60Hz (Others are custom-made.)

  2. Primary and secondary sides fundamental wave terminal voltage
    1) Primary side 100V / Secondary side 100V
    2) Primary side 200V / Secondary side 200V
    3) Primary side 200V / Secondary side 100V
    ("Noisecuttrans" with other voltage or with over two taps is custom-made.)

  3. Phase
    Single phase(In case of 3 phases, use 3 pieces of single phase, but 3 phases in one unit can be made order.)

  4. Insulation withstand voltage
    AC 2000V (r.m.s) for a minute ("Noisecuttrans" of more than this is custom-made.)

  5. Impulse withstand voltage
    1*40ƒÊS 5kV ("Noisecuttrans" of more than this is custom-made.)

  6. In case of using "Noisecuttrans" in 60Hz,
    use the standard goods of 100V for 110V and 200V for 220V.


    .